蘇州道東 全自動灌裝流水線 自動灌裝+自動上蓋+自動鎖蓋+自動鋁箔封口+激光噴碼+自動貼標 DG-GZX-1L

全自動灌裝流水線DG-GZX-1L

系統特點及功能/Features

■ 控制系統采用 可編程控制器I/O PLC模塊等高端電氣配件制造，性能可靠、后期維護成本低；
     The control system adopts the high-end electrical parts such as programmable controller I/O PLC module, which has reliable performance and low maintenance cost.

■ 密封及軟連接部分采用特氟龍制造，耐溶劑，耐酸堿，壽命長；
      
    The sealing and soft connection uses Teflon, which is solvent resistant, acid and alkali resistant and has long service life.

■ 系統采用兩段式大、小料可調灌裝方式，提高了準確度及生產能力；
    The system adopts two-stage adjustable filling mode for the large and small materials, which improves the accuracy and productivity.

■ 目標量自由設定，適應多種重量范圍的定量灌裝；
 The filling quantity can be set freely, which is suitable for quantitative filling in various weight ranges.

■ 全觸摸屏英文動畫操作，全示教模式操作引導、可顯示目標量、灌裝量、桶數、累計量等信息；
 Full Touch Screen  is English Animation Operation, Full Teaching Mode Operation Guidance, Display Target Quantity, Filling Quantity, Bucket Number, Cumulative Quantity and so on.


■ 系統采用全英文向導式操作，記憶工作組參數、及配方。醉大存儲100組參數、。
The system uses all-English  guided operation to memorize working group parameters and formulas. Maximum storage of 100 sets of parameters,.


■ 設備可擴展以太網接口/DP/NET接口，方便后期工廠數據集中控制與集成監控。
 The device can extend the Ethernet interface/DP/NET interface to facilitate centralized control and integrated monitoring of factory data in the later stage.

基本參數 

■ 灌裝物料名稱: 脂、溶劑、涂料、油漆等。

■ 包裝重量：0.5-1KG

■ 醉小感量：10g

■ 灌裝誤差: 0.2%

■ 灌裝速度：1000-1500pcs/h（關聯人工上桶操作速度，及供料速度）

■ 控制方式：3擋控制（快、中、慢）

■ 灌裝方式: 液面上

■ 秤臺尺寸：定制

■ 灌裝頭: SS316L不銹鋼及特氟龍

■ 結構材質: SUS304不銹鋼

■ 滾筒材質：復合不銹鋼

■ 管路壓力：0.2-0.6MPa(與料性有關)。

■ 物料接口：DN40法蘭，可指定（物料及供料后端管道由貴方提供）

■ 氣源接口：用戶提供8mm氣管接頭，用于快速接頭連接

■ 使用電源：AC220/50Hz(用戶提供至機器一側)

■ 使用氣源：0.4-0.8Mpa(用戶提供至機器一側)

■ 使用溫度：-10℃-50℃

Basic parameters           

Filling material name: grease, solvent, paint, etc.           

Packaging weight: 30KG          

Minimum Sensitivity: 10g           

Filling accuracy: 0.2%          

Filling speed: 100-150 pcs/h (Relevant to manual barreling operation speed and feeding speed)           

Control mode: 3 gear control (fast, medium and slow)        

Filling method: liquid surface           

Scale size: 350*350 mm            

Gun Head Pipeline: SS316L Stainless Steel and Teflon          

Structural Material: SUS304 Stainless Steel           

Drum Material: Composite Stainless Steel            

Pipeline pressure: 0.2-0.6 MPa (related to material properties).            

Material Interface: DN40 Flange, which can be specified (Material and back-end piping supplied by you)           

Gas Source Interface: Users provide 8mm tracheal connectors for fast connection            

Power supply: AC220/50Hz (user supplied to machine side)            

Use of gas source: 0.4-0.8 Mpa (user supplied to machine side)            

Temperature: - 10 -50.